POINT OF USE MIXING VALVES
Leonard’s valve models give plumbing engineers “integrated control” for water tempering design and installation needs, and offer efficient response time to temperature and pressure fluctuations, ensuring optimal temperature control and performance for domestic hot water systems. These valves provide accurately mixed water from extremely low flows of 0.25 GPM (.95 lpm) to 5 GPM (18.9 lpm)
170A-LF
Exposed Point of Use Mixing Valve
The Model 170A-LF is a high performance temperature limiting device used to supply single outlets. Can be used to supply one sensor faucet or one two handle manual faucet.
Certified to ASSE 1070 to control down to 0.25 GPM
Eco-Mix Certified Lead-Free* construction
Integral inlet checks and stainless steel screens
Includes locknut to prevent accidental adjustment
Easy 3/8” tubing or flex hose installation
MODEL 170-LF
Exposed Point of Use Mixing Valve
Lead Free body Locked temperature adjustment cap (vandal resistant)
Copper encapsulated thermostat assembly with polymer thermoplastic shuttle Stainless steel springs Integral check valves on hot and cold inlets Compression fittings on inlets and outlet PRESSURE-TEMPERATURE: Maximum Hot Water temperature: 200°F- (93°C) Approach Temperature 5°F (2.8°C) above set point.
MODEL 270-LF EXPOSED POINT OF USE MIXING VALVE
ECO-MIX ™ Lead Free Bronze body Locked temperature adjustment cap (vandal resistant) Copper encapsulated thermostat assembly with polymer
thermoplastic shuttle Stainless steel springs Buna-N: O’rings
Integral check valves on hot and cold inlets
PRESSURE-TEMPERATURE:
Minimum Flow:0.25 GPM (0.95 l/Min)
Maximum Pressure:125 PSI (8.6 BAR)
Maximum Hot Water temperature: 200°F- (93°C)
Approach Temperature 5°F(2.8°C) above set
point.
MODEL 370-LF EXPOSED POINT OF MIXING VALVE
ECO-MIX ™ Lead Free Bronze body Locked temperature adjustment cap (vandal resistant) Copper encapsulated thermostat assembly with polymer thermoplastic shuttle Stainless steel springs Buna-N: O’rings, Integral check valves on hot and cold inlets
PRESSURE-TEMPERATURE:
Minimum Flow:0.5 GPM (1.9 l/Min)
Maximum Pressure:125 PSI (8.6 BAR)
Maximum Hot Water temperature: 200°F- (93°C), Approach Temperature 5°F(2.8°C) above set point.